Description
Xpresscut Micro 7mm diameter for drilling a wide variety of tiles (see compatibility guide).
- Easy fit hexagonal shank with laser-etched diameter
- Vacuum brazed exposed heavy-duty diamonds
- Integrated wax cooling core
Instructions for use:
1 – Commence drilling at a 45 degree angle, level up once tip has scarred the surface.
2 – Rotate and oscillate whilst drilling (do not apply undue pressure), allow the diamonds and speed of cut to do the work.
3 – Periodically remove dust from hole and the diamond tip to allow wax to melt.
Disclaimer:
a) Applying too much pressure will shorten the lifespan of the drill bit.
b) For optimum drilling performance, a 230V drill is preferable over a cordless drill, due to a higher RPM.
c) Diamonds will become hot during use; do not touch or dip into water, as a sudden change in temperature can cause fracture to the diamond tip.
d) Never use with hammer action.
e) Ensure periodic removal of debris from the tip, as build-up of dust will most certainly prevent the wax from cooling the tip and reduce the lifetime of the diamonds.
f) Always use a vacuum cleaner during drilling as this prevents the tip from clogging & overheating from dust build up which also prevents the wax cooling core to melt. Failure to use a vacuum cleaner will result in the bonded diamonds wearing away a lot sooner.
We take no responsibility or liability for any damages or failure arising out of, or in connection with misuse of the product.
