Tap Accessories

Ball tap washer 3/8" x 1/8" Suitable for low pressure ball valves Pack of four

Basic set for 4-hole thermostatic bath mixer For Tile mounted taps Concealed unit includes: secuflex shower hose set, Secubox, mounting plate Maximum pull-out length of hose: 1100mm Connection dimension: DN15 Minimum of 1 bar pressure required Material:...

Aero metal handles Suitable for waterways ceramic disc taps Chrome finish Tap not included

Pair of deck mounted 3/4" valves Minimum operating pressure 0.2 bar Chrome finish Lever style

12 litres per minute water saving flow regulator For use with bath shower mixer taps and showers Fits onto any 1/2" shower hose Water and energy saving Minimum 1 bar working pressure   Product data

Extension piece Straight coupler Length: 50mm Parrallel 1/2" BSPP male and 1/2" BSPP female Material: Brass Chrome finish

Outlet regulator 1.0bar Fits showers and bath shower mixers  Regulates flow constantly to the 12L/min 

Spare parts pack for Eon basin mixer Includes: Double angled pop up rod, chrome horseshoe, rubber horseshoe, 2 locating screws with nuts,1 base O ring and aerater.            

Frankie face pin wrench Suitable to use with: Aquamix-C Aquamix-S

Tap handles only Pair

Reduces to 2l/min Fits basin and sink taps showing the symbol to reduce water consumption Regulates flow constantly to the LPM shown

Flow Straightner Chrome FS46CP

M24 Aerator Fits into tap spout Aerates and regulates the flow of water Chrome

Economical, self-cleaning tap flow restrictor and aerator Water flow controlled by touch Quick and easy to install Fits most taps M24x1 Male thread Non-adjustable flow rate Flow rate between 3.8 - 8l/min Touch on and off High scaling resistance

Replacement tap heads Suitable for New Options brassware For use with ceramic disc valves

Regulates flow constantly to 12l/min Fits shower and bath shower mixers Comes in a chrome finish Outlet regulator at 1.0 bar and above

Economical, self-cleaning tap flow restrictor and aerator with timer Water flow is controlled by touch Time adjustable between 2 and 6 seconds Quick and easy to install Fits the majority of taps M24 x 1 Male Thread Flow rate between 3.8 and 8ltr/min

Replacement hot carrtridge To be used in the following VADO valves:KEN-100/CD, KEN-101/CD, KEN-106/CD, KEN-110/CD, KEN-120/CD, KEN-121/CD, KEN-124/CD, KEN-131/CD, KEN-133/CD, KEN-136/CD, KEN-137/CD, KEN-151/CD Thermostatic cartridge suits: EVO-145T,...

Replacement cold carrtridge To be used in the following VADO valves:KEN-100/CD, KEN-101/CD, KEN-106/CD, KEN-110/CD, KEN-120/CD, KEN-121/CD, KEN-124/CD, KEN-131/CD, KEN-133/CD, KEN-136/CD, KEN-137/CD, KEN-151/CD Thermostatic cartridge suits: EVO-145T,...